Bambu X1C vs P1S: Choosing the Right High-Speed 3D Printer

Two of Bambu Lab’s latest 3D printers, the high-performance Bambu X1C and Bambu P1S. The premium version of the X1C includes higher-end features such as 7 μm Lidar with carbon fiber reinforced polymers, priced at $1,449. The $699 P1S is a standout value, offering full enclosure and activated carbon filtration (a basic setup goes for $949 with AMS). They have multi-color printing capabilities and they are the same in terms of building volume, maximum speed. When faced with the decision Bambu X1C vs P1S, it is up to you regarding how much money you can or want to invest, what material of filament and requirements are needed at a certain level corresponding to your knowledge in 3D printing.

So, let’s dive into our Bambu X1C vs P1S analysis.

Overview and Pricing

PRICE: The price difference is quite ridiculous when comparing the Bambu X1C vs P1S. The X1C is a higher-end and more feature-packed offering, which can be seen in its price.

Design and Build

Both the Bambu X1C and P1S have nearly identical external dimensions, so both are arguably desktop printers. However, the X1C’s carbon rail with welded steel chassis gives it greater rigidity and a stiffer frame that can accommodate higher speeds. The P1S is a tad lighter, but it uses an enclosed architecture that many hot-end makers say can be good for printing materials like the less-regulated temperature filament.

Print Volume and Speed

The Bambu X1C shown at the left, and P1S on right: Each of these printers has roughly equivalent build volumes within reason…and each also has very impressive max speeds and accelerations given their reason definition. While it shows a slightly faster Benchy print time over the X1C (1.5 minutes quicker), this could possibly be due to some optimizations that result in great top speeds during its benchmark speed run, but which may not transpire into average real-world printing results on most models and prints.

Print Quality and Precision

In that context, the Bambu X1C vs P1S comparison for instance tells us both come with high-end specifications to guarantee top-notch print quality. It is necessary to confirm that the first layer of cruising in Z1S / XIS can be scratched by all scanners, and therefore 20 μm Lidar resolution on toolboards with a width of about7-μm which needs AI inspection. The vibration compensation supports more fluid print at high speeds and both models have it. Bambu X1C vs P1S

Materials and Extrusion System

Bambu X1C vs P1S Material Compatibility Comparison: In the material compatibility roundup, both Bambu 3D printers are able to print a variety of filaments. The main caveat seems to be that the X1C appears to have been optimized for “next-level” materials like carbon and glass fiber reinforced polymers. The X1 Carbon also has an enhanced hot-end and heated bed setup that, in some cases, can enable you to print more challenging material with less frustration.

Multi-Color and Multi-Material Printing

The Bambu 1XC and P1S also SUPORR multi-color printing, with a function called Automatic Material System (AMS). Provided as a 4-Unit System Color Bar (or bar kit) for up to four AMS units stacked resulting in up to 16-color full sweeps. When comparing the two, Bambu X1C vs P1S multi-color printing offers similar capabilities which make it great for those looking to print with lots of color or even add complex prints.

Cooling and Ventilation

I wonder if the P1S offer much more effective cooling and ventilation in comparison with Bambu X1C vs P1S, analysis of individual software configurations The activated carbon filter in the P1S is especially important for users who are worried about fumes when printing with materials like ABS.

User Interface and Connectivity

The user interface and connectivity options are very similar as well, Bambu X1C vs P1S for those two printers. An added benefit of the P1S is that it comes with an aioresBuilt-in screen, which can be convenient for direct control without a connected device.

Intelligent Features

Smart features In the Bambu X1C vs P1S smart feature comparison, there is no stand out winner as with slightly more experience AI-powering its performance praise goes to the X! The spaghetti detection and AI-first layer inspection could save you some time, material costs by the early identification of an aspect gone wrong with your print. Bambu X1C vs P1S

Software and Slicer Compatibility

The Bambu X1C and P1S are compatible with all printer features within the manufacturers own custom slicer software, Studio. Superslicer, Prusaslicer and unofficially Cura2 (Cura with export G-code option) also work for P1S. But some of the more complicated Bambu-specific features like AMS support or sensor-based calibrations will not be present in other slicers besides those from the Bambu Studio. The lastly in 3rd-party slicer compatibility with X1C is not explicitly mentioned. It is possible that Bambu Studio needs G-code, too… but there may be different limits than exporting the file via using Bambu. Contact Bambu Lab for the most accurate details regarding third-party slicer compatibility with your X1C.

Build Plate and Bed Heating

For our Bambu X1C vs P1S build plate battle, the higher maximum bed temperature makes it more suitable for some high-temperature materials. The P1S, though appears much more versatile in build plate compatibility.

Power Requirements and Consumption

The power requirements of both printers are the same according to Bambu X1C vs P1S power consumption comparison.

Noise Levels

Speaking of, Bambu’s models’ documentation, in the case of Bambu X1C vs P1S, the noise level in decibels is not directly identified. However, the reviews of these printers’ users indicate that P1S might be somewhat louder, happening due to the desktop model. Given that the X1C model has strong and sturdy m8 rods and a closed frame, the latter case might be less noisy. So, for updated and proper information, it is recommended that one check the information on Bambu Lab’s website.

Upgrade Potential

Judging by the upgrades and modifications listed on paper, it looks like P1S offers more in that department than Bambu X1C vs P1S upgradeability comparison. Yet I would suggest that BOTH of these printers will probably have many different 3rd party upgrade opportunities in the RepRap / general FDM printing ecosystem.

Customer Support and Community

The product follows the Bambu X1C and P1S, which are both support by Bambu Lab’s customer service as well as a expanding group of users. If P1S gains popularity due to its accessibility it could be better supported by the community in all aspects including mods. Even so, given that the X1C is a premium model it should capture more attention of enthusiasts and professionals who in turn will be able to share various high-quality insights or modifications with the community.

Use Cases and Target Users

On the Bambu X1C vs P1S target user, the X1C model is aimed at experienced users and those who have mastered 3D printers and hope that P1S will support them.

Bambu X1C vs P1S Comparison Chart

Feature	Bambu X1C	Bambu P1S
Price	$1,449 (Combo)	$699 (Base) / $949 (Combo)
Build Volume	256 × 256 × 256 mm³	256 × 256 × 256 mm³
Max Speed	500 mm/s	500 mm/s
Max Acceleration	20,000 mm/s²	20,000 mm/s²
Precision	7 μm Lidar resolution	Not specified
Enclosure	Open	Fully enclosed
Air Filtration	activated carbon air filter	Activated carbon filter
Advanced Materials	Optimized for carbon fiber	Not recommended
AI Features	First layer inspection, Spaghetti detection	No
Built-in Display	5-inch screen	2.7-inch screen
Weight	14.13 kg (22.3 kg with AMS)	12.95 kg

Conclusion: Bambu X1C vs P1S – Which One Should You Choose?

Wrapping up our Bambu X1C vs P1S comparison it looks like there is no winner, both 3D Printers perform very well with amazing a)s and are the best examples of nowadays consumer level FDM based technologies. The choice between them will be mostly decided by your use case, budget and experience.

Choose the Bambu X1C if:

• You require the greatest accuracy and most rapid speed possible
• You work a lot with high-tech materials like carbon fiber reinforced plastics
• You are a professional, or You have an advanced hobbyist and will use it enough to justify the cost.
• You need the latest technology including things like AI-powered first layer confirmation and extra spaghetti detection

Choose the Bambu P1S if:

• Begin your journey in 3D printing or an intermediate user
• You mainly print with regular filaments such as PLA, PETG or ABS
• Properly enclosed with print chamber ventilation
• You just want a more economical option that can still print with high-performance speeds and in multiple colors.

At the lower and upper ends of its pricing Babu X1C and P1S are providing very goody values, respectively. This is a machine that ups the game for what’s achievable in desktop 3D printing, and while we did have some good points about its little sibling — the P1S offers many of those more advanced features at much better price point. Either way, you’ll have a piece of 3D printing technology that comes from the best at Bambu Lab.

Always keep in mind that a good printer for you is what suits your intended use and falls within budget. If you feel these printers might suit your needs, then when deciding which to buy between the Bambu X1C vs P1S there are a few factors that will help….

ALSO READ
xTool P2 vs Glowforge Pro: Find the Best CO2 Laser Engraver
Bambu P1S vs Prusa MK4: A Comprehensive Comparison of Two Leading 3D Printers
Flashforge Adventurer 5M Pro 3D Printer Review
What can you make with a 3d Printer to Sell and what will be your strategy?

Why you can trust 360 Tech Insights: Our team of experienced reviewers tests and compares products and services for hours on end so you can select the best option.

FAQs:

---